SECTION 4: ASSEMBLY
Beginning Assembly |
| Guide Rails |
|
|
|
|
|
|
Disconnect power to the machine when perform- ing any maintenance, assembly or adjust- ments. Failure to do this may result in serious personal injury.
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Wear safety glasses during the entire assem- bly process. Failure to comply may result in serious personal injury.
Most of your Model G8690 has been assembled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps. Please follow along in the order presented here.
TOOLS REQUIRED: A metric socket set, 6" adjustable wrench, and Phillips® head screw dri- ver.
Install the two guide rails between the two foot assemblies and secure in place using the four setscrews
Figure 2. Guide rails installed.
G8690 Variable Speed Wood Lathe |
