Grizzly G8691 instruction manual Maintenance, GeneralLubrication, Belt

SECTION 6: MAINTENANCE

GeneralLubrication

Regular periodic maintenance on your Model G8691 Wood Lathe will ensure its optimum per- formance. Make a habit of inspecting your lathe each time you use it. Check for the following con- ditions and repair or replace when necessary:

1.Loose mounting bolts.

2.Worn switch.

3.Worn or damaged cords and plugs.

4.Damaged V-belt.

The non-painted surfaces on the Model G8691 should be protected against rust and pitting. Wiping the lathe clean after every use ensures that moisture from wood dust isn’t allowed to trap moisture against bare metal surfaces.

Since all bearings are shielded and permanently lubricated, simply leave them alone until they need to be replaced. Do not lubricate them.

V-Belt

Inspect regularly for tension and wear. Check pul- leys to ensure that they are properly aligned. Proper tension is indicated by no more than 1⁄4" deflection of belt when pushed lightly at a point equally between the two pulleys.

Before performing any type of inspection or maintenance work on this lathe, be sure that the power cord is unplugged and all moving parts have come to a complete stop. Serious personal injury could occur.

G8691 Wood Lathe w/ Stand -13-