Table of Contents
Important Safety Information
Land Pride
These are common practices that may or may not be applicable to the products described in this manual.
Use Safety
Lights and Devices
▲Slow moving tractors,
▲Flashing warning lights and turn signals are recommended whenever driving on public roads.
Transport
Machinery Safely
▲Comply with state and local laws.
▲Maximum transport speed for implement is 20 mph. DO NOT EXCEED. Never travel at a speed which does not allow adequate control of steering and stopping. Some rough terrains require a slower speed.
▲Sudden breaking can cause a towed load to swerve and upset. Reduce speed if towed load is not equipped with breaks.
▲Use the following maximum speed - tow load weight ratios as a guideline:
▲20 mph when weight is less than or equal to the weight of tractor.
▲10 mph when weight is double the weight of tractor.
▲IMPORTANT: Do not tow a load that is more than double the weight of tractor.
Practice Safe Maintenance
▲Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information.
▲Work in a clean dry area.
▲Lower the implement to the ground, put tractor in park, turn off engine, and remove key before performing maintenance.
▲Allow implement to cool completely.
▲Do not grease or oil implement while it is in operation.
▲Inspect all parts. Make sure parts are in good condition & installed properly.
▲Remove buildup of grease, oil or debris.
▲Remove all tools and unused parts from implement before operation.
Tractors With Cabs
Tractors Equipped With
ROPS
▲There should be sufficient clearance for the operator when mounted to a tractor with a cab or that is equipped with ROPS.
▲The ROPS may need to be extended or flipped around to obtain sufficient clearance.
2 | DM36 Series Disc Mowers | 5/5/08 |
