Land Pride
Introduction
Table of Contents
Land Pride welcomes you to the growing family of new product owners.
This Disc Mower has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance, and safe operating practices will help you get years of satisfactory use from the machine.
Application
The Land Pride Disc Mowers are designed and built to cut hay, grass, and other cultivated forage crops on farms, ranches,
Land Pride Disc Mowers are designed to deliver good cutting performance even in thick, tangled, and wet grass conditions. Standard replaceable rock guards provide cutter bar protection in stony conditions and will greatly extend cutter bar life. A standard
Land Pride Disc Mowers are well suited for use in agricultural regions where humidity and moisture conditions are typically higher and the potential for crop entanglement and tough ground conditions are present. See “Features and Benefits”, “Section 5” for additional information.
Using This Manual
•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.
•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.
•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded,
Terminology
"Right" or "Left" as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.
Definitions
NOTE: A special point of information that the operator must be aware of before continuing.
IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.
Owner Assistance
The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.
If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the disc mower.
The parts on your disc mower have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your disc mower require replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and mod- el number when ordering parts from your Land Pride deal- er. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.
Serial Number Plate Location | 20775 |
| |
Figure 1 |
|
Further Assistance
Your dealer wants you to be satisfied with your new disc mower. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:
1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.
3.For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS
5/5/08 | DM36 Series Disc Mowers | 7 |
