Table of Contents
Section 1 Assembly and
Land Pride
Belt Cover and Pulleys Assembly
Refer to Figure
1.Assemble the inner guard (#11) and the guard reinforcement (#1) to the disc mower with the 3/8” X 1” long bolts (#4) and flat washers (#6).
2.Install pulleys (#8) and (#9) as shown and secure with keys (#2).
3.Install belt (#10) to pulleys. Pulley (#8) may need to be adjusted so pulley can be assembled. Refer to “Belt Tension Adjustment” on page 17.
Support Stand Assembly
Refer to Figure
Insert stand into tube on the hitch as shown and secure with pin and hair pin cotter.
Support Stand
Figure | 20765 |
|
Cutting Unit
Figure | 20767 |
10 DM36 Series Disc Mowers | 5/5/08 |