Land Pride.
Table of Contents
Important Safety Information . . . . . . . . . . .1
Be Aware of Signal Words . . . . . . . . . . . . . . . . . . . 1 Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . .7
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 7
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 7
Further Assistance . . . . . . . . . . . . . . . . . . . . . . 7
Section 1 Assembly and Set-Up . . . . . . . .8
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Assembly Preparation . . . . . . . . . . . . . . . . . . . . . . 8
Cutter Bar and Gearbox Lubrication . . . . . . . . . 8
Mainframe Assembly . . . . . . . . . . . . . . . . . . . . . . . 8
Belt Cover and Pulleys Assembly . . . . . . . . . . . . 10
Support Stand Assembly . . . . . . . . . . . . . . . . . . . 10
Cutting Unit Assembly . . . . . . . . . . . . . . . . . . . . . 11
Section 2 Operating . . . . . . . . . . . . . . . . .12
Attaching the Tractor . . . . . . . . . . . . . . . . . . . . . . 12
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Operating Check List . . . . . . . . . . . . . . . . . . . . . . 13
Working Position . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mowing Instructions . . . . . . . . . . . . . . . . . . . . . . . 14
Adverse Field Conditions . . . . . . . . . . . . . . . . 14
Operating Instructions . . . . . . . . . . . . . . . . . . . . . 15
Section 3 Adjustments . . . . . . . . . . . . . . .16
Transport Lock Operation . . . . . . . . . . . . . . . . . . 16
Belt Tension Adjustment . . . . . . . . . . . . . . . . . . . 17
Cutting Height . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Section 4 Maintenance and Lubrication .18
General Maintenance . . . . . . . . . . . . . . . . . . . . . . 18
At the beginning of each season . . . . . . . . . . . 18
Servicing Blades . . . . . . . . . . . . . . . . . . . . . . . . . 18
Blade Replacement . . . . . . . . . . . . . . . . . . . . . 18
Fastener Replacement . . . . . . . . . . . . . . . . . . 18
Cutter Bar Timing Adjustment . . . . . . . . . . . . . . . 19
Removal of disc shaft assemblies . . . . . . . . . . 19
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Driveline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Driveline
Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cutter Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Frame Pivot Point . . . . . . . . . . . . . . . . . . . . . . 22
Hitch Pivot Point . . . . . . . . . . . . . . . . . . . . . . . 22
Section 5 Specifications and Capacities 23
Section 6 Features and Benefits . . . . . . .24
Section 7 Troubleshooting . . . . . . . . . . .25
Section 8 Appendix . . . . . . . . . . . . . . . . .26
Torque Values Chart . . . . . . . . . . . . . . . . . . . . 26 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
© Copyright 2002 All rights Reserved
Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Land Pride is a registered trademark.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
DM36 Series Disc Mowers | 5/5/08 |
