BT Broadband manual Connect computer using CD recommended

Connect computer using CD (recommended)

Run the CD to help you connect your computer to your Hub and make sure your computer is set up correctly for using BT Total Broadband. If you have more than one computer, run the CD on each one to connect it to your Hub.

1Insert the CD into the computer that you want to connect to your Hub.

C\kÂj ^\k jkXik\[
	_\ gfZb\k fggfj`k\
	^l`[\ `e k
Hl`Zb JkXik
Aljk fg\e flk\ pfli j`dgc\	jk\gj kf ^\k fec`e\%
Xe[ ]fccfn k

BT Total Broadband CD

N\Âi\
jli\
pflÂcc
\eafp
lj`e^
9K
KfkXc
9ifX[YXe[%

v1.1.0

Your CD is in your welcome pack

2Wait a few moments for the CD to start, follow the on-screen instructions.

> If CD doesn’t automatically run, see page 33

> If CD asks you to enter your username and password, see page 34

Connect computer manually using wireless

1If your computer is already connected to your Hub using an Ethernet cable, unplug this cable.

2Place your computer close to the Hub for a good wireless signal.

3If you haven’t already, install your wireless adapter in your computer using the adapter manufacturer’s instructions. If you’re using a laptop with built-in wireless, turn wireless on by either using the wireless switch (if your computer has one) or activating wireless from within your wireless software. Your wireless adapter must be 802.11b, g or n compliant.

16Set-up