Grizzly G9017/G9018 manual Introduction, Technical Data, Size, Inventory Figures 1

Introduction

The Model G9017/G9018 (Figure 1) is designed for bending thick walled pipes (schedule 40 and

80)and has six different bending dies ranging in size from 1⁄2" to 2" for the G9017 (see Figure

2)and from 1⁄2" to 3" for the G9018. The Model G9017/G9018 is not designed for bending thin walled pipes or exhaust pipe.

We stand behind our machines. If you have any service questions or parts requests, please con- tact us.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

Technical Data

Maximum Working Pressure:	6259 PSI
Maximum Load	24,000 Lbs.
Maximum Travel	91⁄2"
Pipe Size Capacity	(G9017) 1⁄2"–2"
.....................	(G9018) 1⁄2"–3"
Maximum Pipe Wall Thickness	0.179"
Hydraulic Oil Reservoir Capacity	2.5 Pints
Type of Hydraulic Oil	H32

Weight			(G9017), 90 Lbs.
	........................................		(G9018), 150 Lbs.
	Size	Schedule 40	Schedule 80
	1⁄2"	YES	YES
	3⁄4"	YES	YES
	1"	YES	YES
	11⁄4"	YES	NO
	11⁄2"	YES	NO
	2"	YES	NO
	21⁄2"	YES	NO
	3"	YES	NO

Inventory (Figures 1 & 2)
A.	Bender	1
B.	Dies, (G9017) 1⁄2", 3⁄4", 1", 11⁄4", 11⁄2", 2")	6

C.Dies, (G9018) 1⁄2", 3⁄4", 1", 11⁄4", 11⁄2", 2", 21⁄2",

3")	8
D. Pump Handle Bar	1

	Pump
	Handle
Socket	Bar

Figure 1. Model G9017.

Figure 2. Model G9017 bending dies.

The Model G9017/G9018 isaheavymachine(93/152 lbs. shipping weight). DO NOT over-exert yourself while unpacking or mov- ing your machine—get assistance.