|
| TECHNICAL DATA |
|
| |
Torque Specifications |
| |
• | Engine crankshaft bolt | 50 ft/lb (67 Nm) |
• | Deck pulley bolts | 45 ft/lb (61 Nm) |
• | Lug nuts | 75 ft/lb (100 Nm) |
• | Blade bolt | |
• | Standard ¼" fasteners | 9 ft/lb (12 Nm) |
• | Standard 5/16" fasteners | 18 ft/lb (25 Nm) |
• | Standard 3/8" fasteners | 33 ft/lb (44 Nm) |
• | Standard 7/16" fasteners | 52 ft/lb (70 Nm) |
• | Standard ½" fasteners | 80 ft/lb (110 Nm) |
When this product is worn out and no longer used, it should be returned to the reseller or other party for recycling.
In order to implement improvements, specifications and designs can be altered without prior notification.
Note that no legal demands can be placed based on the information contained in these instructions.
Use only original parts for repairs. The use of other parts voids the warranty.
Do not modify or install
Conformity Certificates
USA requirements
Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill the requirements. This is also applicable to special requirements for any of the states, (California emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents.
CE requirements
Vibration data corresponding to Directive 2002/44/EC is given in the Technical Data Section. The Declaration of Conformity is included in the literature packet.
