G9744Z Metal Cutting Bandsaw -13-
Inventory
After all the parts have been removed from the
crate, you should have the following items:
Box 1: (Figure 4) Qty
A. Model G9744Z Bandsaw ............................1
Hardware and Tools (Not Shown)
Chip Tray ....................................................1
Triangle Screw 5/16-18 x 3/4" ....................1
Flat Washer 5/16" .......................................1
Hex Nut 5/16-18 .........................................1
Hex Bolts M12-1.75 x 50 (Leveling) ...........4
Hex Nuts M12-1.75 (Leveling) ................... 4
Handwheel .................................................1
Handwheel Handle .....................................1
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi -
ency, replacements can be obtained at your local
hardware store.
Figure 4. G9744Z inventory.
A
NOTICE
Some hardware/ fasteners on th e inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are miss-
ing.