| Identification |
|
Spindle | Spindle Hex Nut | Table Insert |
Drum and Sanding | Spindle Washer |
|
|
| |
Sleeve |
|
|
| Table |
|
Sander Body |
|
|
| Dust Port |
|
|
| Drums and Sanding Sleeves |
| Power |
|
| Cord |
|
| Table Inserts |
|
|
| Spindle Washers |
ON/OFF Paddle Switch w/Disabling Key | (Not Shown) | |
| ||
Figure 1. Machine identification.
for your Own Safety Read This Manual
before Operating Spindle Sander
a)Wear eye protection.
b)Support workpiece on worktable.
c)Minimize pinch hazards. use the smallest table insert possible with sanding drum.
d)Avoid kickback. feed workpiece against rotation of drum.
e)Avoid entanglement with spinning drum. Do not wear gloves, necktie, or loose clothing. Tie back long hair.
Model G0739 (Mfg. Since 2/12) |
