Grizzly GO739 InventoryCleanup, Inventory Figure Qty, Before cleaning, gather the following

InventoryCleanup

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Inventory: (Figure 3)		Qty
A.	Spindle Sander Assembly	1
B.	Table Inserts 1⁄2", 3⁄4", 1", 1⁜1⁄2", 2", 3"	6
C.	Arbor Wrench	1
D.	Spindle Hex Nut	1
E.	Spindle Washers 5⁄8", 7⁄8", 1⁜3⁄4"	3
F.	Sanding Drums 3⁄4", 1", 1⁜1⁄2", 2", 3"	5
G.	Sanding Sleeves 1⁄2", 3⁄4", 1", 1⁜1⁄2", 2", 3"	6
H.	Base Washer 23⁄4"	1

NOTICE

If you cannot find an item on this list, care- fully check the machine and the packaging materials. Some of these items may be pre- installed for shipping or become misplaced during unpacking.

A H

B

G

C

F

D E

Figure 3. Box Contents

The unpainted surfaces of your machine are coated with a heavy-duty rust preventative that prevents corrosion during shipment and storage. This rust preventative works extremely well, but it will take a little time to clean.

Be patient and do a thorough job cleaning your machine. The time you spend doing this now will give you a better appreciation for the proper care of your machine's unpainted surfaces.

There are many ways to remove this rust preven- tative, but the following steps work well in a wide variety of situations. Always follow the manufac- turer’s instructions with any cleaning product you use and make sure you work in a well-ventilated area to minimize exposure to toxic fumes.

Before cleaning, gather the following:

•Disposable Rags

•Cleaner/degreaser (WD•40 works well)

•Safety glasses & disposable gloves

•Plastic paint scraper (optional)

Basic steps for removing rust preventative:

1.Put on safety glasses.

2.Coat the rust preventative with a liberal amount of cleaner/degreaser, then let it soak for 5–10 minutes.

3.Wipe off the surfaces. If your cleaner/degreas- er is effective, the rust preventative will wipe off easily. If you have a plastic paint scraper, scrape off as much as you can first, then wipe off the rest with the rag.

4.Repeat Steps 2–3as necessary until clean, then coat all unpainted surfaces with a quality metal protectant to prevent rust.

Model G0739 (Mfg. Since 2/12) -11-