MountingAssembly, Machine Base Workbench

MountingAssembly

The base of this machine has mounting holes that allow it to be fastened to a workbench or other mounting surface to prevent it from moving during operation and causing accidental injury or damage.

The strongest mounting option is a "Through Mount" (see example below) where holes are drilled all the way through the workbench—and hex bolts, washers, and hex nuts are used to secure the machine in place.

Bolt

Flat Washer

Machine Base

Workbench

Flat Washer

Lock Washer

Hex Nut

Figure 5. Example of a "Through Mount" setup.

Another option is a "Direct Mount" (see example below) where the machine is secured directly to the workbench with lag screws and washers.

Place the spindle hex nut, table inserts, sand- ing drums and sleeves, and spindle washers in the appropriate sized accessory slots beneath the table. A sanding drum does not need to be installed until after the test run.

		Sanding Drums
Table Inserts		and Sleeves

Grizzly GO739 owner manual MountingAssembly, Machine Base Workbench

Models: GO739

MountingAssembly

Figure 5. Example of a "Through Mount" setup.

Another option is a "Direct Mount" (see example below) where the machine is secured directly to the workbench with lag screws and washers.

Place the spindle hex nut, table inserts, sand- ing drums and sleeves, and spindle washers in the appropriate sized accessory slots beneath the table. A sanding drum does not need to be installed until after the test run.

Sanding Drums

Table Inserts

and Sleeves

Figure 7. Assembled sander.

Lag Screw

Flat Washer

Machine Base

Workbench

Figure 6. Example of a "Direct Mount" setup.

Model G0739 (Mfg. Since 2/12)