www.smoothfitness.com
15
ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
STEP 1: Assemble the Upright
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or |
|
|
pinch. DO NOT tighten bolts until STEP2. |
|
|
When attaching the Right upright (310) first attach the 8 pin data cable to the wire | 306 | X10 |
in the upright. This will allow you to pull the data cable up through the upright after | ||
installation. |
|
|
(1) Slide the base frame covers over uprights. | 304 | X10 |
|
(2)Attach the Left Upright (wrapped in clear plastic) and Right Upright (wrapped in green shaded plastic) to the treadmill main frame, and secure using the M8x15mm Allen Head Bolts (306) with M8 Flat Washers (304). HAND TIGHTEN ONLY. Do not tighten the M8x15mm Allen Head Bolt (306) until STEP2 has
been completed.
Green plastic wrap
Clear plastic wrap
Bolts should be hand tight only