MAINTENANCE
Operating Guides and Tips
Avoid overloading the cutting tool
Always use sharpened cutting bits. Do not apply excessive pressure to the cutting tool while using. If the speed drops abnormally, decrease pressure immediately. If the bit stops abruptly or becomes blocked, release the trigger at once.
Ensure the safety of the workplace.
Clear the work area of all parts and debris that may cause injury by flying objects. Securely fix the object to be cut or fastened in a vise or otherwise clamp to avoid injury. Do not attempt to hold workpiece by hand.
Inspect the cutting tool before use. Run the cutting tool before using to ensure all parts are running smooth- ly and there are no abnormal sounds or sparks. If any defect is found, have unit serviced.
Know your worksite. Only cut as deep as necessary. Check behind walls for wires, other electrical hazards, or plumbing.
Disassembly and improper reassem- bly of this device can result in electri- cal shock danger. Always have this device serviced by an qualified elec- trical repair technician. Serious injury will result.
Maintenance
Regular periodic maintenance on your H0604 will ensure its optimum perfor- mance. Make a habit of inspecting your tool each time you use it. Check for the fol- lowing conditions and repair or replace when necessary:
1.Loose fasteners.
2.Worn switch.
3.Worn or damaged cords and plugs.
4.Any other condition that could ham- per the safe operation of this machine.
Since this tool is encased in a double insu- lated plastic cover, leave repair and ser- vice issues to a qualified service techni- cian. This includes brush replacement, lubrication or any other internal operation.
Ensure that no air passages get blocked. If they do, blow them out with compressed air. WARNING: Wear safety glasses when cleaning tool with compressed air.
Plastic parts can easily be cleaned with a damp cloth, but never use water to clean any electrical parts. Solvents should also be avoided on plastic because of the pos- sibility of damage.
The potential for injury using this device is great. Use extreme caution and care when operating, adjusting and maintaining this saw. Failure to observe safe handling practices will result in serious personal injury.
H0604 Cutting Tool |
