4.Using a 532" drill bit, drill 134" deep holes straight through the four holes in the back of the body (Figure 13). Note—Drilling the holes deeper than 134" could result in drilling out through the fingerboard.

Figure 13. Drilling the screw holes.

5.Place the black neckplate setter and the sil- ver neckplate over the holes on the back of the guitar body.

6.Secure the neckplate assembly, the guitar body, and the neck together with the includ- ed 134" wood screws (Figure 14). DO NOT use glue.

Figure 14. Correctly attached neck.

Pick Guard

To attach the pick guard to the guitar body:

1.Push one white and one black wire through the hole shown in Figure 15.

Figure 15. Pick guard wires.

2.Push the remaining black wire through the hole shown in Figure 16.

Figure 16. Pick guard wire.

 

 

 

H3123 Electric Guitar Kit

 

 

 

-12-

 

 

 

 

Page 14
Image 14
Grizzly H3123 instruction manual Pick Guard, To attach the pick guard to the guitar body