Model H3253, H3254, H3255 Spray Gun -7-
Prior to ass embly and use of the spray
gun, it is e ssential t hat all parts be thor-
oughly cleaned and dried. Please refer to
Cleaning in the MAINTENANCE section
on Page 13 for more detailed instructions.
Make sure all connections are tight enough
to prevent ai r leaks but not so tight as to
damage the tool.
1. Screw the filter on the bottom of the
feed tube as shown in Figure 4 (Model
H3254 only).
AssemblyFigure 4. Installing H3254 filter.
3. Attach the air hose to the spray gun
using the barbed hose fitting provided
(Models H3253, H3254, H3255) or with
a 1⁄4" NPS quick connect fitting (not
included).
4. Attach the spray gun to a filtered, regu-
lated air source. See the Tool Data
Sheet on Page 5 for your spray gun air
requirements.
Note: For the best results, use a hose
that will be dedicate d for spray use
only. Do not use a hose that has been
used with an in-line oiler or other pos -
sible contaminant.
If you need additional help with this assem-
bly, call our Technical Supp ort a t: ( 570)
546-9663.
Figure 5. Installing cup.
2. Remove/install cup by loosening/tight-
ing the cup lock and engaging/disen-
gaging the hooks to the cup pins (see
Figure 5). For the Model H3254, the
cup is simply screwed on.