Model H3253, H3254, H3255 Spray Gun-8-
1. Fluid Control: Controls the volume of
material that t ravels through the fluid
tip.
2. Pattern Control: Adjusts the s pray
pattern from a round pattern to a wide
fan. Not available on H3254.
3. Air Flow Control: Controls the fluid
pressure inside the spray gun (H325 5
only).
4. Atomizing Cap: Controls the spray
pattern from vertical to horizontal.
5. Trigger: Two stage trig ger. Stage
one only releases compressed air for
blowing off the work pie ce. Stage two
sprays material.
Figure 6. Controls.
Pattern Control
Atomizing Cap
Trigger
Controls
Air Flow Control
Fluid Control
Cup Lock