H6145 28° Clipped Head Framing Nailer
-4-
INTRODUCTION If you have any comm ents regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed bel ow.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Mod el
H6145 28º Clippe d Head Fra ming Nailer.
This mod el is par t of a growing Grizzly
family of fine pneumatic tools. W hen used
according to the guidelines set forth in this
manual, you can expect years of trouble-
free, enjoyable operation and proof of
Grizzly’s co mmitment to c ustomer satis-
faction.
The Model H6145 i s designed to toenail
into corners. This nailer is ideal for fram-
ing, pallet and crate assem bly, deck, roof,
fencing, and sidewall sheathing construc -
tion. Th e Mo del H6145 featur es a 36 0°
exhaust port, c omfort grip rubber handle,
and economical ai r consumption with low
noise.
The specificat ions, detai ls, and photo-
graphs in this manual represent the Model
H6145 as supplied w hen the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no o bliga-
tion on the part of Gr izzly.
Foreword Contact Info
Machine Data
Nail Size ................7⁄64"-1⁄8" Shank Diameter
Nail Strip Angle ......................................28º
Nail Length ..........2"-3½"(Clipped Headed)
Magazine Capacity ......................100 Nails
Air Inlet ...........................................¼" NPT
Weight .............................................81⁄3 lbs.
Operating Pressure ..................70-120 PSI
Read the manual before operation.
Become familiar with this nailer, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.