5. Connect the 1/4" push-on hose fittings to your air supply hose and onto the inlet fitting on the regulator (Figure 4).
Figure 4. Spray gun fittings installed.
Tank Assembly
Tank
Pressure
Regulator
Mixing Handle and Crank
Carrying Handle
Pressure Relief Valve
Vent Valve
Tank Pressure Gauge
Figure 2. Controls and features.
To assemble the paint tank:
1. Open the lid and remove the hardware shipped with the tank.
2.Install the four caster assemblies with the hex nuts and washers, as shown in
Figure 3.
Figure 3. Assembly items.
3.Invert the tank lid, slide the propeller onto the shaft, and snug the hex bolt in place (Figure 3).
4.Place the hand crank onto the shaft, and snug the hex bolt in place (Figure 3).
Model H6329 21⁄2 Gallon Paint Tank |
