MODEL H7725 |
84" EURO STYLE |
|
INSTRUCTIONS |
Assembly |
Figure 1. Model H7725 Birch Workbench.
Specifications
Finish | Lacquer Sealed |
Table Thickness | 4" |
Front Vise Size | 193⁄4" x 7" |
End Vise Size | 6" x 6" |
Overall Size | 841⁄2"W x 2411⁄16"D x 341⁄4"H |
531⁄2"W x 19"D x 14"H | |
Storage Shelf Size | 551⁄2"W x 181⁄2"D |
Shipping Weight | 332 lbs. |
Refer to the last page of these instructions to inventory your shipment for ease of assembly.
To assemble the workbench:
1.Insert eight (E5) barrel nuts into panels (LF & LB), and assemble the drawer with eight (E1) screws in the orientation shown in Figure 2.
| E2 | E1 |
|
| |
H7 |
| LL |
|
| E5 |
| LF | H8 |
|
| |
| BP |
|
LR |
| LB |
|
| |
E5 |
|
|
E1 |
|
|
Figure 2.
Safety & Limitations
•Maximum workbench table load is 500 lbs.
•Do not stand or climb on the workbench.
•Do not apply an unbalanced load on the table that could result in the workbench tipping over.
•Keep unsupervised children away from the workbench.
•Do not stand or climb on the workbench.
•Do not use workbench outdoors or in wet or damp locations.
•Do not overload the vises or use cheater pipes on the vise handles to increase lever- age.
•Do not weld on this bench.
2.Position the right side leg (B) on the floor so the FRONT arrow points to the front and install two barrel nuts (E4) into cross brace (D & E) as shown in Figure 3.
|
| B |
|
|
|
| Front |
|
|
| Slot |
|
|
| E3 |
D |
| E4 | E2 |
|
|
| |
| Note: Slot |
|
|
| for Lock | E |
|
|
|
|
Figure 3. Right leg and cross brace installation.
Copyright © JULY 2009 By Grizzly Industrial, Inc.
Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
(For models manufactured since 7/09) #CR12019 printed in CHINA
