Clean Up

The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a sol- vent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser. To clean thoroughly, some parts may need to be removed. For opti- mum performance from your machine, make sure you clean all moving parts or sliding contact surfaces that are coated. Avoid chlo- rine-based solvents, such as acetone or brake parts cleaner, as they may damage painted sur- faces should they come in contact. Always follow the manufacturer’s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and could cause an explosion or fire if used to clean machinery. DO NOT use gasoline or petroleum products to clean the machinery.

Many of the solvents commonly used to clean machinery can be toxic when inhaled or ingest- ed. Lack of ventilation while using these sol- vents could cause seri- ous personal health risks or fire. Take precautions from this hazard by only using cleaning solvents in a well ventilated area.

Site Considerations

Weight Load

The Model H7761 Combo Sander is a moderate weight load with a small footprint. Most tables and workbenches should be sufficient to carry the weight of the machine. Reinforce the table or workbench if you question its ability to support the added weight.

Working Clearance

Working clearances can be thought of as the distances between machines and obstacles that allow safe operation of every machine with- out limitation. Consider existing and anticipated machine needs, size of material to be processed through each machine, and space for auxiliary stands or work tables. Also consider the relative position of each machine to one another for effi- cient material handling.

Lighting and Outlets

Lighting should be bright enough to eliminate shadow and prevent eye strain. Electrical circuits should be dedicated or large enough to handle the amperage draw. Outlets should be located near each machine so power or extension cords are clear of high-traffic areas. Observe local elec- trical codes for proper installation of new lighting, outlets, or circuits.

Unsupervised children and visitors inside your shop could receive serious per- sonal injury. Ensure child and visitor safety by keep- ing all entrances to the shop locked at all times. DO NOT allow unsuper- vised children or visitors in the shop at any time.

-12-

H7761 2" x 27" Belt & 6" Disc Combo Sander

Page 14
Image 14
Grizzly H7761 owner manual Clean Up, Site Considerations, Weight Load, Working Clearance, Lighting and Outlets