SECTION 4: OPERATIONS

Operation Safety

Basic Controls

 

 

 

 

 

 

Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.

Loose hair and clothing can get caught in machin- ery and cause serious per- sonal injury. Keep loose clothing and long hair

away from machinery.

Keep the blade guard in the down position at all times. Failure to do this could result in serious personal injury or death.

NOTICE

If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

H8145 Baby Table Saw

ON/OFF Switch: Starts and stops the motor. The switch is equipped with a disabling key that can be removed to prevent unauthorized people from using the machine.

Fence Lock Knobs: Lock/unlock each end of the fence when setting the fence for workpiece cut- ting width.

Blade Tilt Lock Handles: Lock/unlock the tilt angle of the blade for bevel or straight cutting. A tilt degree scale is located at the front of the machine to indicate the current blade position.

Fence Lock

Knob

ON/OFF

 

Blade Tilt

Switch

 

Lock Handle

 

 

 

Figure 6. Table saw controls (front).

Fence Lock

Knob

Blade Tilt

Lock Handle

Figure 7. Table saw controls (rear).

-13-

Page 15
Image 15
Grizzly H8145 owner manual Operations, Operation Safety Basic Controls