MODEL H8174 |
50 Gallon Dust |
Collection Bag Holder |
INSTRUCTION SHEET |
Introduction |
This
Inventory
After all the parts have been removed from the box, use the Parts Breakdown on Page 2 to inventory the parts.
The metal plates of this bag holder have sharp edges. Use gloves to protect your hands during assembly to avoid cutting yourself.
Figure 1. Model H8174 assembled.
Use the Model H8174 bag holder with the dust collection bag as shown in Figure 2.
Assembly
1.Connect the four metal plates together using the (24)
2.Install the rubber handles on the inside of the bag holder with the (4)
If you need help with your new bag holder, call our Tech Support at: (570)
Figure 2. Model H8174 inserted into 50 gallon
dust collection drum with collection bag.
COPYRIGHT © MARCH, 2007. BY GRIZZLY INDUSTRIAL, INC., REVISED OCTOBER, 2007
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS9106 PRINTED IN TAIWAN