SAFETY
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.
Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
| Indicates a potentially hazardous situation which, if |
| not avoided, COULD result in death or serious injury. |
| Indicates a potentially hazardous situation which, if |
| not avoided, MAY result in minor or moderate injury. |
| It may also be used to alert against unsafe practices. |
NOTICE | This symbol is used to alert the user to useful |
information about proper operation of the equipment. |
Safety Instructions For Pneumatic Tools
1.READ THIS MANUAL. This tool may cause personal injury if used incor- rectly. This manual contains proper safety and operating instructions that must be followed to reduce this risk.
2.WEAR EYE PROTECTION. This tool may throw small fragments dur- ing operation, which may cause seri- ous eye injury. Always wear ANSI approved safety glasses or face shield to reduce your risk from this hazard.
3.WEAR A RESPIRATOR. This tool may produce fine dust during oper- ation, which can cause respiratory injury if inhaled. Always wear a respi- rator NIOSH approved for the type of material being processed.
4.WEAR HEARING PROTECTION. Operating this tool for prolonged time periods may damage your hearing. Your risk depends on length and fre- quency of use. To reduce your risk of this hazard, wear hearing protection.
5.MAINTAIN SAFETY GUARDS. Your tool may be equipped with safety guards or other structural compo- nents designed to reduce the risk of injury during operation. Never modify or operate this tool with any guards or components removed or damaged.
6.KEEP CHILDREN AWAY. Prevent children from injury by keeping them away from this tool. Disconnect and lock the tool away when not in use.
Model H8213 14 Piece Angle Die Grinder Kit |
