Grizzly H8235 owner manual Replacing Pistons Rings, Nailer Repair Kit

Replacing Pistons/

O-Rings

Under heavy use, a piston, piston shaft, or O-ring may wear out. Replacement is quick and easy. Contact Grizzly Customer Service at (800) 523-4777 to obtain the fol- lowing Piston Repair Kits or the Complete O-Ring Repair Kits.

Nailer Repair Kit	Part Number
Framing Nailer:
Piston Repair Kit	PH7665095
O-Ring Repair Kit	PH7665096
Brad Nailer:
Piston Repair Kit	PH8235164
O-Ring Repair Kit	PH8235165
Palm Nailer:
Piston Repair Kit	PH6141026
O-Ring Repair Kit	PH6141027

Always disconnect air from nailer whenever servicing! During mainte- nance, a nailer connected to air may fire accidentally, causing serious per- sonal injury!

Framing & Brad Nailer

To replace a piston for your framing or brad nailer:

1.DISCONNECT NAILER FROM THE AIR SUPPLY!

2.Remove all nails from the magazine cartridge, and clean the exterior of the nailer.

3.Remove the four cap screws on the back of the nailer, near the exhaust port.

4.Remove the cap.

5.The top of the piston should now be visible inside the cylinder, which is housed in the head of the nailer.

6.Watch the discharge area and push the top of the piston with your finger. You will see the piston shaft slide down the discharge area.

7.Taking care not to scratch or dent the nailer parts, use a wooden dowel or similarly shaped tool to push the piston shaft back inside the nailer until you can grip the piston head and remove it from the cylinder. Clean and inspect the parts for cracks, wear, or burrs.

Model H8235 3-Piece Framing/Brad/Palm Nailer Kit -13-