Blade Alignment

The blade position can be adjusted slightly in case it contacts the table insert when raised or tilted. This adjustment can be made either by moving the whole trunnion assembly, or by just moving the arbor bracket. Try adjusting by mov- ing the whole trunnion first, this is the easier of the two ways.

To adjust the blade position by moving the trunnion:

1.Disconnect the machine from the power source!

2.Remove the table and wings and set them to one side. Be sure to note the position of the table shims. Replace them to their original position before re-attaching the table.

3.Loosen the four trunnion mounting bolts as shown in Figure 42, and nudge to either the left or right depending on where the blade is hitting the saw.

Trunnion Mount Bolts

Figure 42. Trunnion mounting bolts.

The table and wings rep- resent a very heavy load. DO NOT over- exert yourself while lift- ing or moving the table and wings – get assis- tance.

-42-

4.Reattach the table, making sure there is ade- quate blade clearance through all blade adjustments. Recheck guard alignment to the blade and to the table top. Adjust as nec- essary and tighten down all the bolts before use.

5.If the blade is still contacting the insert, repeat Steps 1-4. Check all other adjust- ments.

6.Recheck the blade to miter slot adjustments, and adjust as necessary.

Bracket Lock Bolt

Arbor Bracket

Figure 43. Adjusting arbor bracket.

To adjust the blade position by moving the arbor bracket:

1.Disconnect the machine from the power source!

2.Remove the table and wings and set them to one side. Be sure to note the position of the table shims. Replace them to their original position before re-attaching the table.

3.Loosen the bracket lock bolt shown in

Figure 43.

4.Slowly slide the arbor bracket towards the end of the shaft.

NOTICE

If you make the adjustment described in this section, check and adjust the blade splitter to make sure it aligns with the blade.

G1023S Series Heavy-Duty 10'' Table Saw

Page 44
Image 44
Grizzly MODEL instruction manual Blade Alignment, Trunnion mounting bolts

MODEL specifications

The Grizzly MODEL represents a significant advancement in the realm of high-performance machinery, designed with a blend of robust engineering and cutting-edge technology. This model caters primarily to industrial applications, where reliability and efficiency are paramount.

One of the standout features of the Grizzly MODEL is its powerful engine, which boasts superior torque and horsepower. This capability allows it to perform demanding tasks with ease, making it suitable for a variety of heavy-duty operations. The engine is designed for fuel efficiency, ensuring that users not only benefit from increased performance but also reduced operational costs.

The Grizzly MODEL is also equipped with advanced drivetrain technology. The all-wheel-drive system enhances traction, significantly improving maneuverability on diverse terrains. Whether operating on rough, uneven ground or navigating through tight spaces, the Grizzly MODEL excels, ensuring it can handle any job site with precision.

In terms of safety, this model includes multiple features aimed at protecting the operator and surrounding personnel. It is built with reinforced structures, roll-cage protection, and advanced braking systems, all contributing to a safe work environment. Moreover, ergonomic controls enhance usability, allowing operators to maintain comfort and concentration throughout the working day.

Another key aspect of the Grizzly MODEL is its intuitive interface. The integrated control panel provides real-time data on performance metrics and diagnostics, enabling operators to make informed decisions quickly. This feature minimizes downtime by allowing for early detection of potential issues.

The durability of the Grizzly MODEL cannot be overlooked. It is constructed with high-grade materials that withstand harsh conditions, making it a long-term investment for businesses. The ability to withstand extreme weather and heavy workloads ensures that the equipment remains operational under the most challenging circumstances.

On the technology front, the Grizzly MODEL incorporates smart connectivity features, allowing users to monitor performance remotely. This connectivity facilitates seamless integration with other systems, enhancing overall operational efficiency.

In conclusion, the Grizzly MODEL stands out with its powerful engine, advanced drivetrain, robust safety features, intuitive interface, and impressive durability. It is an exceptional choice for industries requiring reliable, high-performance machinery that meets the demands of today's fast-paced work environments.