Grizzly MODEL instruction manual Screw, Added Washers

Use caution and remain alert when working around the saw blade. Failure to follow this warning could result in serious personal injury or death.

4.Next, set a straightedge against the face of the saw blade and the blade splitter as shown in Figure 19. If the blade splitter is properly aligned, please skip ahead to Page 26; otherwise, continue with the next step.

!

Figure 19. Guard in line with blade.

5.If the blade splitter is to the right of the blade as shown in Figure 20, simply add washers between the splitter and the front mounting bracket, and adjust the rear splitter support as shown in Figure 21.

Add washers here to move back of split- ter to the left.

Splitter	Add washers
	here to move
	front of split-
	ter to the left.

Blade

Figure 20. Improper splitter/blade alignment.

Adjusted

Rear Splitter

	Adjustment
	Screw
	Front Support
	Bracket
Proper Alignment	Added Washers

Figure 21. Proper splitter/blade alignment.

G1023S Series Heavy-Duty 10'' Table Saw -23-