Grizzly Model G0562 instruction manual Collector Ring, Canister Filter, To install the collector

Collector Ring
Components and Hardware Needed:	Qty
Collector Rings (R & L)	2
Flange Bolts 5⁄16"-18 x 1⁄2"	20
Rubber Gaskets	2
Tools Needed:
Wrench or Socket 12mm	1
To install the collector:

1.Place one of the rubber gaskets around the rim of the intake on the collector ring.

2.Secure one of the collector rings to the metal “Y” outlet with 8 flange bolts (Figure 12).

Figure 12. Collector ring installed.

3.Attach the canister support to the side of the collector ring with the 2 remaining flange bolts.

4.Repeat steps 1-3for the other collector ring (Figure 13).

G0562 3 HP Dust Collector

Figure 13. Collector rings installed.

Canister Filter
Components and Hardware Needed:	Qty
Canister Filters	2
Canister Filter Cleaning Handles	2
Metal Belt Clamps	2
Wide Foam Strips	2
Tools Needed:
Wrench or Socket 10mm	1
To install the canister:

1.Secure the wide foam strip around the out- side top rim of the collector ring as shown in Figure 14.

Figure 14. Installing wide foam strip.

-15-