SETUP
InventorySetup
Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570)
Save all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a shipping claim can be difficult.
After you have unpacked the box you should find the following:
Model H8222 Inventory (Figure 1) | Qty | ||
A. | Spray Gun | 1 | |
B. | Cup | 1 | |
C. | 1 | ||
D. | Cleaning Brush | 1 | |
E. Barbed Hose Fitting (not shown) | ....... 1 | ||
| A |
|
|
|
| B |
|
C
D
Figure 1. Model H8222 inventory.
Before assembling and using the spray gun, thoroughly clean and dry all parts. Please refer to Cleaning in the MAINTENANCE section on Page 10 for more detailed instructions. Make sure all connections are tight enough to prevent air leaks but not so tight as to damage the tool.
To setup the spray gun:
1.Attach the gun body to the cup as shown in Figure 2.
Gun Body
Connection
Point
Cup
Air Fitting
Figure 2. Model H8222 gun body
installation.
2.Attach the air hose directly to the air fitting on the spray gun or with a female 1⁄4" NPT quick connect fitting (not included).
3.Attach the spray gun to a filtered, regu- lated air source. See the Specifications on Page 3 for your spray gun air pres- sure requirements.
Note: For the best results, use a hose that will be dedicated for spray use only. Do not use a hose that has been used with an
Model H8222 Spray Gun
