Grizzly Model H8222 Operations, Spraying, Explosion Hazard, Toxic Fumes, To use your spray gun

OPERATIONS

Spraying

EXPLOSION HAZARD!

DO NOT smoke or have any source of flame or spark near spraying. Vapors will explode if ignited.

EYE AND RESPIRATORY HAZARD! Always wear ANSI approved goggles and a NIOSH approved respirator when using spray equipment. Failure to protect yourself can lead to severe eye/lung injuries.

TOXIC FUMES!

Only spray in well ventilated areas or an approved spray booth. NEVER spray in a confined space where toxic fumes and flammable vapors can accumulate to deadly levels.

The Model H8222 siphon feed spray gun set is designed to spray a wide variety of materials such as lacquers, stains, prim- ers, multi-component paints, clear coats, acrylics, epoxies etc. It is ideal for auto body and woodworking projects.

To use your spray gun:

1.Read and follow the material manufac- turer's instructions for spraying, mixing, safety, disposal, and any other instruc- tion on the label or Material Safety Data Sheet (MSDS).

2.Ensure the cup is securely tightened and all other fittings are secure to avoid air leaks or material spills.

3.Set the inlet air pressure (the air coming to the spray gun) to the lowest pres- sure recommended in Specifications on Page 3 or to the material manufac- turer's recommendations.

4.Adjust the atomizing cap to vertical or horizontal. See Atomizing Cap and Fan Adjustments on Page 8 for fur- ther explanation.

5.Fill the cup with material.

6. Trial-and-error are necessary to achieve the results you want along with a fair amount of practice. Test your material flow and spray pattern on a piece of cardboard or some scrap of material similar to your project.

-6- Model H8222 Spray Gun