Controls | |
Atomizing Cap | Pattern Control |
| Fluid Control |
Trigger |
|
Air Flow Control |
|
| Cup |
Figure 3. Controls.
1.Fluid Control: Controls the volume of material that travels through the fluid tip.
2.Pattern Control: Adjusts the spray pattern from a round pattern to a wide fan.
3.Atomizing Cap: Controls the spray pattern from vertical to horizontal.
4.Trigger: Squeeze the trigger half way to blow air, or squeeze all the way to spray.
5.Air Flow Control: Controls the fluid pressure inside the spray gun.
6.Cup: Holds up to 1000cc of material for spraying.
Cup Removal & Installation
The cup is removed/installed by loosen- ing/tighting the cup lock cover and engag- ing/disengaging the cup pins in the cup cover groove (see Figure 4).
Cup Lock
Cover
Cup Pin
(1 of 3)
Figure 4. Installing cup.
Model H8222 Spray Gun |
