Grizzly T10148 specifications Swivel Base, Instructions, Installation, Specifications

MODEL T10148

SWIVEL BASE

INSTRUCTIONS

Installation

				For easy and safe base installation, attach lifting
Your vise and swivel base are heavy! Get the				straps or chains to the vise at the four locations
				shown in Figure 1, and using a suitable lifting
assistance of a second person or use a hoist
				apparatus, raise the vise.
when lifting the vise and installing the swivel
base. Wear heavy duty leather boots for foot
and toe protection, and keep hands and fin-
gers away from all pinch points. Ignoring this
warning can lead to a severe crushing injury
or finger amputation!
				T10148
Specifications				T-Bolt and Nut
Length			131⁄2"
				T10148 Swivel Base
Width			12 3⁄4"
Overall Height (Pin Tip to Base Underside)			..27⁄16"	T10147 Hydraulic Vise
T-Bolt Bolt Pattern (On Center)		......................	73⁄4"
Alignment Dogs Bolt Pattern (On Center)			10"	Figure 1. Model T10147 vise installed on the
Base to Table Bolt Pattern (On Center)			12"
				Model T10148 base.
Replaceable Spindle Diameter		16mm
Surface Parallelism		0.015/100mm		Block the vise for safety, and lubricate the base
Alignment Dog Width		16mm
				and vise mating surfaces with white lithium grease.
Alignment Dogs		Included
				Secure the base and vise together with the two
T-Bolts and Nuts		Included
				T-bolts and nuts.
T-Bolt Size		1⁄2"-11 x 23⁄8"
T-Bolt Nut Size			1⁄2"-11	Maintenance
360° Scale	Marked 0°-90° Every 90°
				Depending on type of cutting fluids used, operat-
Scale Incrimination			1°
				ing environment, and frequency of use, periodi-
Swivel Base Body	Ductile Iron FCD60
				cally remove the swivel base from the vise. Clean
Weight		32 lbs.
				all mating surfaces, the spindle, and the bore with
If you need help with your new item, call our Tech				mineral spirits. Then, re-lubricate all cleaned sur-
				faces with white lithium grease and reassemble.
Support at: (570) 546-9663.
	Copyright © JANUARY, 2009 By Grizzly Industrial, Inc.
Warning: No portion of this manual may be reproduced in any shape
Or form without the written approval of Grizzly Industrial, inc.
		#CR11497 printed in TAIWAN