Specifications, Ethernet Ports, Command Port | Multitech MTPSR1-120

Specifications

Dual Ethernet ProxyServer User Guide

Specifications

•Protocols - Point-To-Point Protocol (PPP), and Serial Line Internet Protocol (SLIP)

Ethernet Ports

•Two Ethernet Interface - 10Base-T (twisted pair) RJ-45 connectors.

Command Port

•Single 19.2K bps asynchronous Command Port using a short RJ-45 to DB-25 cable with a DB-25 female connector

WAN Link

•One RS232/V.35 port connector.

Electrical/Physical

•Voltage - 115 VAC (Standard), 240 Volts AC (Optional)

•Frequency - 47 to 63 Hz

•Power Consumption - 10 Watts

•Dimensions - 1.625" high x 6" wide x 9" deep

5.63cm high x 22.34cm wide x 33.51cm deep

•Weight - 2 pounds (.92 kg)

10

Image 10

Multitech MTPSR1-120 manual Specifications, Ethernet Ports, Command Port, WAN Link, Electrical/Physical

Contents

Dual Ethernet ProxyServer Model MTPSR1-120 User Guide Patents User GuideRecord of Revisions RevisionDescription TRADEMARK Chapter 1 - Introduction and Description Chapter 2 - InstallationChapter 3 - Software Loading and Configuration Chapter 4 - Firewall Software Appendixes Chapter 5 - Remote Configuration and ManagementChapter 6 - Warranty, Service and Tech Support Index Chapter 1 - Introduction and Description Introduction Chapter 2 - InstallationChapter 3 - Software Loading and Configuration Preview of this Guide Chapter 4 - ProxyServer Software Chapter 5 - Remote Configuration and ManagementChapter 6 - Warranty, Service and Tech Support Appendixes ETHERNET 1 and PowerFront Panel Description WAN Link Command Connector RS232/V.35 ConnectorEthernet 1 and 2 10Base-T Connectors Power Connector Ethernet Ports SpecificationsCommand Port WAN Link Chapter 2 - Installation Unpacking Your ProxyServer Safety WarningsFigure 2-1. Unpacking Figure 2-2. Cabinet Mounting Screw V.35 Shunt ProcedureStep Procedure Figure 2-3. Shunt Positions Cabling Your ProxyServer Cabling Procedure Step ProcedureFigure 2-4. Cable Connections Chapter 2 - Installation Table 2-1. cont’d Step Procedure Dual Ethernet ProxyServer User Guide Chapter 3 - Software Loading and Configuration Loading Your Software Chapter 3 - Software Loading and Configuration 7. The “Do you want to download default setup?” dialog is displayed IP Port Configuration DHCP Relay Agent does not apply Default WAN Link Configuration 19. The Writing Setup dialog box is displayed as the setup configuration is written to the ProxyServer Chapter 4 - Firewall Software Typical Applications Configuration 1 - Cable/DSL ModemFigure 4-1. Cable/DSL Modem Configuration Private LAN Chapter 4 - Firewall Software Internet Services Network Configuration 2 - Existing Dual-LAN with RouterFigure 4-2. Existing Dual-LAN with Router Configuration Private LAN Configuration 3 - New Dual-LAN with T1 DSU Figure 4-3. New Dual-LAN with T1 DSU Configuration The Internet LAN Port Parameters group is either configured with the DHCP Client option active, enabling the ISP to dynamically provide the registered Internet IP addresses, or with the DHCP Client option disabled if a static IP addressing scheme is provided by the ISP. If the DHCP Client field is deactivated the static IP Address of 204.26.12.10 is then entered and the WAN option is checked in the Internet Gateway Parameters group Download Default Setup Configuration Port SetupFirewall Program Group Uninstall Firewall Configuration Download Firmware UpdateWAN Device Configuration Firewall Configuration Changing IP Parameters Net Mask - Enter the Subnetwork Mask for the WAN port in this field Changing WAN Port Parameters Adding Proxy Applications Enabling the DHCP Server Enabling PPP/SLIP Chapter 5 - Remote Configuration and ManagementEnabling PPP Enabling SLIP Applications Statistics Filtering Chapter 5 - Remote Configuration and Management Modem-Based Remote Configuration Procedure Connect the modem to your local telephone line Click OK when you are satisfied with your selections LAN-Based Remote Configuration Procedure Windows Sockets Compliant TCP/IP Stack 8 Click Exit when the downloading is complete Remote Management Telnet Firewall Management Menu Firewall ConfigurationThe Firewall Management Menu provides two basic options Firewall Configuration and WAN Device Configuration. A further option enables you to close the Telnet session from this menu by pressing the Esc key WEB Management Chapter 6 - Warranty, Service and Tech Support Limited Warranty On-line Warranty Registration Tech Support Chapter 6 - Warranty, Service and Technical SupportRecording ProxyServer Information ATTN SERVICE OR REPAIRS ServiceMULTI-TECH SYSTEMS, INC 2205 WOODALE DRIVE MOUNDS VIEW, MINNESOTA To Download a File The Multi-Tech BBSTo Log on to the Multi-Tech BBS If you know the file name About the Internet About the Multi-Tech Fax-Back ServiceAbout CompuServe ftp//ftp.multitech.com Appendixes Dual Ethernet ProxyServer User Guide Appendix A - TCP/IP Description Internet Protocol IP Index F Secured LAN Port Parameters Configuration 2 - Existing Dual-LAN with Router26Configuration 3 - New Dual-LAN with T1 DSU 20, 33