Dual Ethernet ProxyServer User Guide
Changing WAN Port Parameters
In order to change the WAN port parameters of a DCE device connected to the RS232/V.35 connector on the ProxyServer, click on the WAN button in the Firewall Setup menu. The WAN Port Setup dialog box is displayed.
From this dialog, you can configure the parameters of the WAN port. To enable the WAN port, click on the Port Enable check box.
The Mode group allows you to configure the WAN interface to match the DCE device connected to the RS232/V.35 port on the ProxyServer. Options include Asynchronous or Synchronous mode. If asynchronous is chosen, you can select the proper Baud speed. If synchronous is chosen, External Clocking or Internal Clocking must be selected.
The Connection Method group allows you to configure the port as Direct Connect/Leased Line, Answering or Dialing, and allows you to select the Modem Type and Dial Number for the DCE device.
For a detailed description of each field, refer to the
34
