Dual Ethernet ProxyServer User Guide
Remote Management
This section describes typical client applications that can be used to configure the ProxyServer remotely. It is important to note that although any subsequent changes to configuration can be made using these applications, the initial setup and configuration of the ProxyServer must be done on the local PC, using the ProxyServer software provided with your unit.
Although establishing access to the ProxyServer varies between applications, the configuration functions mirror those of the ProxyServer software. For more information on ProxyServer software, refer to Chapter 4 - Proxy Server Software.
Telnet
A typical Telnet client application is described in this chapter. The Firewall ProxyServer has a
The TCP/IP stack has to be loaded before the Telnet client (a Windows application) will run, and the Telnet Server option has to be selected from the Applications Setup dialog box using Firewall Configuration (see Chapter 4 - Applications). Double click on the Telnet icon (or shortcut) and a blank Telnet screen is displayed. Click Connect Remote System and the Connect dialog box is displayed. Select (or enter) a Host Name (the IP address of the ProxyServer). In this example, the Host Name is 192.168.2.4.
When you enter a valid Host Name (IP address) and click on Connect, you are immediately connected to the target ProxyServer and the Firewall Management Menu screen is displayed.
46
