Grizzly T10458 Assembly, Supplies/Tools Before Starting, Recommended Tools & Supplies

ASSEMBLY

Supplies/Tools Before Starting

The majority of the wooden components in this kit are fully machined at the factory and are ready for assembly. A small amount of drilling, sanding, and light machining will be required to complete the ukulele.

Recommended Tools & Supplies:

•Wood Glue

•Finishing Supplies

•Wood Putty

•Rubber Bands

•Sandpaper #180, #240, #320, and #600

•Sanding Block

•Masking Tape

•Razor Blade

•1⁄4" or 1⁄2" Chisel

•Coat Hanger

•Clamps

•Drill Bit Set

•Tack Cloth

•Coping, Jig, or Scroll Saw (Optional)

•Nippers or Fret Cutters

•Straightedge (16" min.)

•NIOSH-Approved Respirator

•ANSI-Approved Safety Glasses

Model T10458 (Mfg. Since 10/11)

Read this manual completely before starting the construction process. This will familiarize you with the parts of the ukulele used in construction, the specific procedures you will perform, the tools needed, and the time required.

During construction, we recommend trial-fitting before gluing components together. This provides the opportunity to fit items and correct any issues. It also helps minimize the amount of clean up necessary after gluing parts together. ALWAYS let glue set for the manufacturer's recommended time.

While this manual is meant to guide you through the complete construction process, we recom- mend that you refer to literature, expert advice, and other resources for further information.

-5-