Grizzly t10493 owner manual Setup, UnpackingInventory, Description Qty

SECTION 3: SETUP

UnpackingInventory

This tool was carefully packaged for safe transportation. Remove the packaging materials from around the tool and inspect it. If you discover any damage, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condition of your shipment, inventory the contents.

If any non-proprietary parts are missing (e.g., a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

This tool presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and operations before using the tool!

	B
	A
	C
		D
	F
	E
	Figure 3. Inventory contents.
Description		Qty
A.	Grinder (T10495 shown)	1
B.	Inner Flange	1
C.	Outer Flange	1
D.	Fixed Pin Spanner Wrench	1
E.	Handle	1
F.	Replacement Carbon Brushes	1
D.	Grinding Wheel 30 Grit (not shown)... 1

Serious injury could occur if you connect this tool to power before completing the setup process. DO NOT connect to power until instructed later in this manual.

-6- T10493, T10494 & T10495 (Mfg Since 10/11)