Clearing Jammed
Nails
All nailers occasionally get jammed.
To clear a jammed nail from the dis- charge area on the Model T20644:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
Always disconnect air from nailer whenever clearing a jammed nail!
2.Release the magazine pusher and slide the nail stick out of the back of the magazine.
3.Flip up the quick release latch located on top of the nailer nose assembly, as shown in Figure 6.
Figure 6. Releasing quick release latch.
4.Remove the driver guide cover (Figure 7).
Figure 7. Removing driver guide cover.
5.The jammed nail should now be vis- ible; remove it from the discharge area with needle nose pliers.
6.Replace the driver guide cover and snap the quick release latch back into operating position.
T20644 34° Angle Finish |
