|
| Diagnostics and Troubleshooting |
|
|
|
Observation | Possible Cause | Possible Solution |
|
|
|
|
|
|
The supply or takeup door | The latch on the door was pushed | Pull the latch back to its normal position with |
will not close. | in (flush with the door) when the | scissors and close the door with a normal |
| door was closed with too much | amount of force. |
| force. |
|
latch
Additional Troubleshooting Tips for the Printer
•Be careful to correctly load, seat, and thread the paper into the paper cassettes.
•Be careful to correctly close all doors prior to printing. Doors ajar or interlock switches that are not closed will prevent the printer from printing.
•Be sure to follow the proper instructions when installing the digital printer paper saver.
•Before connecting or disconnecting the SCSI cable or terminator, turn off the power for the printer and the host computer. Also, if you replace the SCSI cable, remove the Ferrite bead from the existing SCSI cable and install it on the new SCSI cable.
September 2000 |
