Operating Procedures
TIP: Practice the following steps in the light with an empty cardboard core before you load a new roll of paper in the dark.
CAUTION: Loading paper into the paper cassette must be completed in a darkroom with the lights off.
7.Position the paper so that the lead edge of the paper is away from you.
8.Insert the core support assembly from the left side into the roll of paper as shown.
9.Push the cardboard core toward the gear until it engages the detent.
cardboard core | detent |
|
10.Install the screw lock onto the core support assembly and ensure that it is snug.
11.Place the core support assembly with the full paper roll into the supply cassette.
IMPORTANT: Make sure that the right and left edges of the paper on the paper roll remain aligned. Do not allow the roll of paper to slide or “telescope”.
screw lock
September 2000 |