Additional Calibration Information
Editing the Calibration Configuration
The Edit Configuration feature allows you to change the printer’s calibration
configuration attributes. However, it is recommended that you use the default
settings for these attributes for most operations. The settings should only be changed for the most advanced operations.
Edit Configuration consists of a set of six tabbed screens— each with related configuration attributes. There can be only one set of configuration attributes for the printer calibration application at a time. If you make any changes to one or more of the tabbed screens and then click OK to save your changes, the changes will overwrite the previous attributes used for the automated calibration.
To edit the calibration configuration:
1.From the KODAK Device Calibration screen,
The LED Calibration Application screen appears.
Edit icon
2. Click the Edit icon.
September 2000 |