Operating Procedures
Installing the Takeup Cassette
Preparing the Takeup Cassette
1.Unlatch the takeup cassette locks and open the takeup cassette.
2.Remove the core support assembly.
3.Move the screw adjuster to the correct position for the paper size that you are loading. Pull the metal spring for the screw adjuster away from the gear and slide the screw adjuster to the correct position until it locks into place in the detent.
4.Slide the correct size cardboard core onto the core support assembly. Push the cardboard core toward the flange until it engages the detent.
5.Install the flanged nut (when using
NOTE: Make sure the screw lock or flanged nut is secure.
6.Place three rubber bands over the cardboard core.
IMPORTANT: The rubber bands must have the same thickness and must not be twisted or wrinkled when installed.
| rubber bands |
| core support |
| assembly |
screw |
|
lock | screw adjuster |
| gear |
| flanged nut |
cardboard core
September 2000 |