SECTION 1: INTRODUCTION
Foreword |
| Contact Info |
|
|
|
|
|
|
We are proud to offer this manual with your new T23096! We've made every effort to be exact with the instructions, specifica- tions, drawings, and photographs of the T23096 we used when writing this manual. However, sometimes we still make an occasional mistake.
Also, owing to our policy of continuous improvement, your T23096 may not exact- ly match the manual. If you find this to be the case, and the difference between the manual and T23096 leaves you in doubt, check our website for the latest manual update or call technical support for help.
For your convenience, we post all avail- able manuals and manual updates for free on our website at www.grizzly.com. Any updates to your model of tool will be reflected in these documents as soon as they are complete.
We stand behind our products. If you have any service questions, parts requests or general questions about the product, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
We want your feedback on this manual. If you can take the time, please email or write to us at the address below and tell us how we did:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA
Email: manuals@grizzly.com
Specifications |
|
|
|
|
|
Tool Bit Shank Size | 1⁄4" |
Free Speed | 25,000 RPM |
Average Air Consumption | 3 CFM |
Operating Air Pressure | 90 PSI |
Maximum Air Pressure | 100 PSI |
Air Inlet Size | 1⁄4" NPT |
Minimum Air Hose Inside Diameter | 3⁄8" |
Weighted Sound Pressure Level | 84.1 dB(A) |
Sound Power Level | 95.1 dB(A) |
Handle Vibration Rating | 0.8 m/s2 |
Net Weight | 0.88 lbs |
Shipping Weight | 1.10 lbs |
Model T23096 Industrial 1⁄4" Die Grinder |
