Depth Gauge Setting, Clamp Plate Adjustment

Depth Gauge Setting

As explained in How the Chain Cuts on Page 19, the depth gauge of the cutter link forces the cutter to pivot forward and self-feed into the wood.

The depth gauge setting is the difference in height between the top plate leading edge and the top of the depth gauge. If this setting (see Figure 34) is too high or too low, the cutter will not properly pivot and self-feed into the wood.

	Depth Gauge
Top Plate	Setting

Depth

Gauge

Figure 34. Depth gauge setting.

Adjusting the depth gauge setting requires the top of the depth gauge is made lower than the top plate leading edge by a specific amount. This amount changes as the top plate leading edge is ground back with successive sharpenings.

It is beyond the scope of this manual to present the many different methods of maintaining the proper depth gauge setting. However, it is impor- tant to state that properly maintaining this setting is critical to the efficient operation of the chain saw. No matter how well the chain is sharpened, if the depth gauge setting is not properly main- tained, the chain will not be able to efficiently cut the wood.

We strongly recommend that you research the many methods and tools for maintaining the prop- er depth gauge setting for your chain, and choose the best solution that works for you.

-28-

Clamp Plate

Adjustment

If necessary, the pressure of the chain holder clamp plates can be adjusted to suit your needs.

To adjust the clamp plate pressure:

1.DISCONNECT MACHINE FROM POWER!

2.Loosen the two cap screws shown in Figure 35. This will allow the inner clamp plate to be adjusted in the next step.

Adjustment Bolt

& Locking Hex Nut

Outside

Cap

Screws

Figure 35. Clamp plate components.

3.Loosen the locking hex nut on the adjustment bolt, then thread the bolt in to force the inner clamp toward the outer clamp.

4.Re-tighten the locking hex nut and the two outside cap screws.

5.Test the clamping pressure of the plates with your chain, and if necessary, repeat this pro- cedure until the clamping pressure is right for your chain.

Model T23108 (Mfg. Since 7/10)

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.

Grizzly T23108 Depth Gauge Setting, Clamp Plate Adjustment, To adjust the clamp plate pressure

Models: T23108