Spray Function
Laundry can be dampened using the spray, providing there is water in the tank.
- Whether steam or dry ironing, you are able to use the spray button (F) to dampen laundry to remove stubborn creases.
- Make sure that there is water in the tank before using this button.
F
For more steam
- Press the Shot of Steam button from time to time (G)
- Wait a few seconds between each shot before pressing the button again.
G
Vertical steam ironing
-Ideal for removing creases from suits, jackets, skirts, hanging curtains etc
-Hang the garment on a hanger and hold the fabric slightly taut with one hand.The steam is very hot, so you should always do this with the garment on a hanger – never while someone is wearing it.
-Set the thermostat control to MAX (H).
-Hold the iron a few centimetres from the fabric to avoid burning delicate fabrics.
-Press the Shot of Steam button (
) repeatedly (I), moving the iron from top to bottom. (See illustration) (J) wait a couple of seconds between each use of the button.
H | I | J |
Integral anti-scale system (depending on model)
-Your iron is equipped with an integral
-This system will help to provide:
• a better ironing quality with a constant flow of steam,
• lasting performance from your appliance.
K
Auto-Stop safety feature (depending on model)
- | The electronic system cuts off the electric power and the |
| |
| warning light flashes if the iron is left vertically on its heel |
| |
| for more than 8 minutes, or in a horizontal position for |
| |
| more than 30 seconds. |
| |
- | To restart the iron, just move it gently until the warning light stops |
| |
| flashing. |
|
|
Note : | when the | L | |
|
| it is normal for the thermostat light to remain off. |
|
Anti-drip function (depending on model)
If the soleplate temperature is too low, the iron will not produce steam because of the anti- drip technology which prevents droplets of water leaking from the soleplate.
When using the iron for the first time, allow 2 minutes for steam to be produced.
