Initial set-up and tuning television channels
The television set is equipped with automatic channel search, which searches for terrestrial channels
You start the search and can then copy the tel- evision channels into four favourite lists and sort them there into your order of preference.
For
The various settings
Depending on the type of antenna connected, you can decide which channels you would like the television to search for.
7Tunes digital terrestrial television channels, on page 15.
7Tunes digital television channels from the cable provider, on page 15.
7Tunes analogue television channels, in the chapter “Special functions”, starting on page 46.
7Further settings for digital television channels after the initial
Note:
7Make the language and country selection for all types, then continue reading the respective chapter.
Selecting language, country and operating mode
1Switch on the television set from standby with »8«, »1…0« or »P+« or
–During initial
Help:
7If this menu is not displayed, restore the
television set to its default settings (see page 34).
2Select the menu language with »<«, »>«, »V« or »Λ« and press »OK« to confirm.
3Select the mode with »<« or »>« and press »OK« to confirm.
–The settings used in »Home Mode« help to save energy.
–Alternatively, the menu item »Shop Mode« can be selected which the retailer can use for demonstrating the device functions.
Note:
7End the »Shop Mode« by restoring the tel- evision set to its default settings (see page 34).
4Select the country in which the television set is operated with »<«, »>«, »V« or »Λ« and press »OK« to confirm.
–The »Source Setup« menu appears with the »Connection Type« line marked.
Note:
7You can find a description of how to tune the television channel of your choice – de- pending on the antenna connected – in the following chapters.
