Grundig 32 VLD 4201 BF manual Connecting external ­ data media, ENGLISH ­25

USB OPERATION----------------------------------------------------------------------------------------------------------------

Connecting external ­ data media

Before connecting the data medium, switch the television to standby using »8«. Connect the ­device and then switch the television on again.

Before removing the external data medium, the television set must be switched to standby, so that no data loss occurs.

Notes:

7If you use a network cable for external hard disks which are connected to the »USB« socket on the television, this network cable must also be disconnected from the power supply when the television is switched off.

7External data media may not be disconnect- ed from the television set while files on the data medium are being accessed.

7A bi-directional data transfer as defined for ITE (Information Technology Equipment)

devices­ in EN 55022/EN 55024 is not possible.

7USB transfer is not in itself an operating mode. It is only an additional function.

1Connect the »USB« socket of the television and the corresponding socket on the data device (external hard drive, digital camera, card reader or MP3 player) using a USB ca- ble;

or

plug the memory stick into the USB interface »USB« of the television.

2Confirm the display » « with »« (green).

– The file browser appears.

ENGLISH ­25