Grundig 32 VLD 4201 BF Changing stored analogue channels­, Selecting a channel list, ENGLISH ­47

Special settings----------------------------------------------------------------------------------------------------------

Tuning the television channels by entering the channel numbers

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the line » Analogue Manual Tuning« with »V« or »Λ« and press »OK« to confirm.

– The menu appears.

INSTALLATION

ANALOGUE MANUAL TUNING

Program No		1
TSystem		BG
Band		C
Channel		2
Fine Tuning		0
	48.25 MHz
Auto Previous	Auto Next	Store

4Select the line »Program No« by pressing »V« or »Λ« and use »<« or »>« to save the preset.

5Select »Band« by pressing »V« or »Λ« and use »»<« or »>« to choose between »S« (special channel) or »C« (normal channel).

6Select the line »Channel« with »V« or »Λ« and enter the channel number with »<« or »>« step by step, or use »1…0« to enter it directly.

Notes:

7The current system is displayed in the »System« line. If the colour or sound is not functioning properly, select the line »System« with »V« or »Λ«. Use »<« or »>«

to select the preferred setting­ .

7If fine tuning is necessary, select the line »Fine Tuning« with »V« or »Λ« and use »<« or »>« to make the setting.

7Press »« (blue) to save the setting. Note:

7 If you wish to remedy other television channels, repeat steps 4 to 8.

8Press »MENU« to end the setting.

Changing stored analogue channels­

If channels were stored with the automatic chan- nel search while tuning the television channels, you can delete them. You can also store chan- nels in a different preset, change or enter the name of a channel as well as skip channels.

Selecting a channel list

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the line »Program Table« with »V« or »Λ« and press »OK« to confirm.

– The »PROGRAME TABLE« menu appears.

Note:

7Additional operations are explained in the following sections.

Deleting channels

1In the »PROGRAME TABLE« menu, select the television channel to be deleted with »V «, »Λ«, »<« or »>« and press »« (red) to con- firm.

2Press »« (yellow) to confirm the deletion process.

Note:

7»« (blue) allows all television channels to be deleted.

3Press »« (green) to confirm the deletion process.

ENGLISH ­47