Grundig 8140 S manual Headphones, Hi-fi system/AV receiver

OPERATION USING EXTERNAL DEVICES------------------------------

... with an analogue TV signal

7Suitable devices: Digital satellite receiver, DVD player/recorder, set-top box, camera

recorder­ .

7Video signal: FBAS.

7Audio signal: stereo, analogue.

7»AV2« preset.

1 Connect the »Video« socket on the television­ to the corresponding socket of the external­ device with an RCA cable (video signal).

2Connect the »L R« sockets on the television to the corresponding sockets of the external device with RCA cables (audio signal).

Note:

7There must not be a video signal at the »­ Video« and »S-VHS« socket at the same time. This could lead to picture disturbances.

Using a DVD player,

DVD ­recorder, video recorder ­ or set-top box

1Switch on the external device and select the function you wish to use.

2Press » «, use »V«, »Λ«, »<« or »>« to select the preset for the input signal (»AV1«, »AV2«, »S-VHS«, »HDMI1«, »HDMI2«, »HDMI3«, »HDMI4« or »Component«) and press »OK« to confirm.

Headphones

Connecting the headphones

1Plug the headphone jack (3.5 mm ø jack plug) into the headphone socket on the right side of the television.

Changing the headphone volume

1Open the menu with »MENU«.

2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to con- firm.

–The »SOUND SETTINGS« menu ap- pears.

3Select the line »Headphone« with »V« or »Λ«.

4Set the preferred volume with »<« and »>«.

5 Press »MENU« to end the setting.

Note:

7Prolonged listening with headphones at loud volumes can damage your hearing.

Hi-fi system/AV receiver

Connecting the hi-fi system/­ AV receiver

1Connect the »Optical Out« socket on the television to the corresponding socket of the device with an optical digital cable (digital audio signal);

or

connect the »SPDIF« socket on the television to the corresponding socket of the AV receiv- er with an RCA cable (digital audio signal).

Setting the audio format

You can select whether the audio signal out- put via the »Optical Out« or »SPDIF« socket should be in the PCM or AC2 format.

1Open the menu with »MENU«.

2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to con- firm.

– The »SOUND SETTINGS« menu appears.

3Select »Audio Output Setup« with »V« or »Λ« and press »OK« to confirm.

– The menu appears.

4Select the »SPDIF output« with »V« or »Λ«.

5Select the preferred audio format (»PCM« or »Dolby* D«) with »<« or »>«.

Note:

7If you wish to output the audio only via a multi-channel amplifier/AV receiver, set the option »TV Speaker« to »Off« in the menu.

6Press »MENU« to end the setting.

ENGLISH 47­